top of page

ELECTRIC HEAT TRACING FOR ANY PIPING APPLICATION

QMax ETS | Electric Tracing

Process

SEET

QMAX ETS Logo_FINAL_Color.png
QMax ETS | Electric Tracing

Process

SR CABLE

ONLY

For High Heat
Applications
(>300°F / >149°C)
For High Heat
Applications
(>300°F / >149°C)
For Medium Heat
Applications
(60°F- 300°F / 16°C- 149°C)
For Low Heat Applications
(<60°F / <16°C)

The innovative design of QMax ETS Maximizes the Performance of all types of electric tracing. Without QMax, much of the length of these systems is heating the airspace around the pipe and relying on ineffective convection heat transfer to heat the pipe and process. This causes localized hot and cold spots along the pipe. QMax ETS creates a conductive path  between the electric tracing and the pipe and increases the heating surface area to as much as 2 inches per strip. The energy from the electric tracing is efficiently and effectively transferred into the pipe and process. QMax ETS also extends the life of electric tracing by reducing the temperature of the cable during heating cycles.

QMax ETS Offers Consistent Results whether the goal is:

•  Process Temperature Maintenance
•  Minimum Pipe Wall Temperature Maintenance
•  Light-duty Process Heat-Up
•  Critical Process Freeze Protection

​

bottom of page